Data
bolts

bolts

active ARFF Publicly available Visibility: public Uploaded 04-10-2014 by Joaquin Vanschoren
0 likes downloaded by 0 people , 0 total downloads 0 issues 0 downvotes
  • binarized Chemistry Life Science mythbusting_1 study_1 study_123 study_15 study_20 study_41
Issue #Downvotes for this reason By


Loading wiki
Help us complete this description Edit
Author: Source: Unknown - Date unknown Please cite: SUMMARY: Data from an experiment on the affects of machine adjustments on the time to count bolts. Data appear as the STATS (Issue 10) Challenge. DATA: Submitted by W. Robert Stephenson, Iowa State University email: wrstephe@iastate.edu A manufacturer of automotive accessories provides hardware, e.g. nuts, bolts, washers and screws, to fasten the accessory to the car or truck. Hardware is counted and packaged automatically. Specifically, bolts are dumped into a large metal dish. A plate that forms the bottom of the dish rotates counterclockwise. This rotation forces bolts to the outside of the dish and up along a narrow ledge. Due to the vibration of the dish caused by the spinning bottom plate, some bolts fall off the ledge and back into the dish. The ledge spirals up to a point where the bolts are allowed to drop into a pan on a conveyor belt. As a bolt drops, it passes by an electronic eye that counts it. When the electronic counter reaches the preset number of bolts, the rotation is stopped and the conveyor belt is moved forward. There are several adjustments on the machine that affect its operation. These include; a speed setting that controls the speed of rotation (SPEED1) of the plate at the bottom of the dish, a total number of bolts (TOTAL) to be counted, a second speed setting (SPEED2) that is used to change the speed of rotation (usually slowing it down) for the last few bolts, the number of bolts to be counted at this second speed (NUMBER2), and the sensitivity of the electronic eye (SENS). The sensitivity setting is to insure that the correct number of bolts are counted. Too few bolts packaged causes customer complaints. Too many bolts packaged increases costs. For each run conducted in this experiment the correct number of bolts was counted. From an engineering standpoint if the correct number of bolts is counted, the sensitivity should not affect the time to count bolts. The measured response is the time (TIME), in seconds, it takes to count the desired number of bolts. In order to put times on a equal footing the response to be analyzed is the time to count 20 bolts (T20BOLT). Below are the data for 40 combinations of settings. RUN is the order in which the data were collected. Analyze the data. What adjustments have the greatest effect on the time to count 20 bolts? How would you adjust the machine to get the shortest time to count 20 bolts? Are there any unusual features to the data? Data RUN SPEED1 TOTAL SPEED2 NUMBER2 SENS TIME T20BOLT The data description and data may be freely used for non-commercial purposes and can be freely distributed. Copyright remains with the author and STATS Magazine. Information about the dataset CLASSTYPE: numeric CLASSINDEX: last

8 features

binaryClass (target)nominal2 unique values
0 missing
RUNnumeric40 unique values
0 missing
SPEED1numeric3 unique values
0 missing
TOTALnumeric3 unique values
0 missing
SPEED2numeric3 unique values
0 missing
NUMBER2numeric3 unique values
0 missing
SENSnumeric4 unique values
0 missing
TIMEnumeric40 unique values
0 missing

107 properties

40
Number of instances (rows) of the dataset.
8
Number of attributes (columns) of the dataset.
2
Number of distinct values of the target attribute (if it is nominal).
0
Number of missing values in the dataset.
0
Number of instances with at least one value missing.
7
Number of numeric attributes.
1
Number of nominal attributes.
0.39
Kappa coefficient achieved by the landmarker weka.classifiers.trees.REPTree -L 3
0.77
Kappa coefficient achieved by the landmarker weka.classifiers.trees.DecisionStump
36.29
Maximum of means among attributes of the numeric type.
Minimal mutual information between the nominal attributes and the target attribute.
0
Second quartile (Median) of skewness among attributes of the numeric type.
0.89
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.RandomTree -depth 1
0.2
Number of attributes divided by the number of instances.
Maximum mutual information between the nominal attributes and the target attribute.
2
The minimal number of distinct values among attributes of the nominal type.
12.5
Percentage of binary attributes.
2.9
Second quartile (Median) of standard deviation of attributes of the numeric type.
0.1
Error rate achieved by the landmarker weka.classifiers.trees.RandomTree -depth 1
Number of attributes needed to optimally describe the class (under the assumption of independence among attributes). Equals ClassEntropy divided by MeanMutualInformation.
2
The maximum number of distinct values among attributes of the nominal type.
-1.17
Minimum skewness among attributes of the numeric type.
0
Percentage of instances having missing values.
Third quartile of entropy among attributes.
0.78
Kappa coefficient achieved by the landmarker weka.classifiers.trees.RandomTree -depth 1
0.89
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.J48 -C .00001
1.46
Maximum skewness among attributes of the numeric type.
0.45
Minimum standard deviation of attributes of the numeric type.
0
Percentage of missing values.
0.52
Third quartile of kurtosis among attributes of the numeric type.
0.79
Average class difference between consecutive instances.
0.89
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.RandomTree -depth 2
0.1
Error rate achieved by the landmarker weka.classifiers.trees.J48 -C .00001
40.29
Maximum standard deviation of attributes of the numeric type.
35
Percentage of instances belonging to the least frequent class.
87.5
Percentage of numeric attributes.
20.5
Third quartile of means among attributes of the numeric type.
0.85
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.DecisionStump -E "weka.attributeSelection.CfsSubsetEval -P 1 -E 1" -S "weka.attributeSelection.BestFirst -D 1 -N 5" -W
0.1
Error rate achieved by the landmarker weka.classifiers.trees.RandomTree -depth 2
0.78
Kappa coefficient achieved by the landmarker weka.classifiers.trees.J48 -C .00001
Average entropy of the attributes.
14
Number of instances belonging to the least frequent class.
12.5
Percentage of nominal attributes.
Third quartile of mutual information between the nominal attributes and the target attribute.
0.13
Error rate achieved by the landmarker weka.classifiers.trees.DecisionStump -E "weka.attributeSelection.CfsSubsetEval -P 1 -E 1" -S "weka.attributeSelection.BestFirst -D 1 -N 5" -W
0.78
Kappa coefficient achieved by the landmarker weka.classifiers.trees.RandomTree -depth 2
0.89
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.J48 -C .0001
-0.96
Mean kurtosis among attributes of the numeric type.
0.94
Area Under the ROC Curve achieved by the landmarker weka.classifiers.bayes.NaiveBayes
First quartile of entropy among attributes.
0
Third quartile of skewness among attributes of the numeric type.
0.72
Kappa coefficient achieved by the landmarker weka.classifiers.trees.DecisionStump -E "weka.attributeSelection.CfsSubsetEval -P 1 -E 1" -S "weka.attributeSelection.BestFirst -D 1 -N 5" -W
0.89
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.RandomTree -depth 3
0.1
Error rate achieved by the landmarker weka.classifiers.trees.J48 -C .0001
12.97
Mean of means among attributes of the numeric type.
0.05
Error rate achieved by the landmarker weka.classifiers.bayes.NaiveBayes
-1.82
First quartile of kurtosis among attributes of the numeric type.
11.69
Third quartile of standard deviation of attributes of the numeric type.
0.85
Area Under the ROC Curve achieved by the landmarker weka.classifiers.bayes.NaiveBayes -E "weka.attributeSelection.CfsSubsetEval -P 1 -E 1" -S "weka.attributeSelection.BestFirst -D 1 -N 5" -W
0.1
Error rate achieved by the landmarker weka.classifiers.trees.RandomTree -depth 3
0.78
Kappa coefficient achieved by the landmarker weka.classifiers.trees.J48 -C .0001
Average mutual information between the nominal attributes and the target attribute.
0.89
Kappa coefficient achieved by the landmarker weka.classifiers.bayes.NaiveBayes
2
First quartile of means among attributes of the numeric type.
0.76
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.REPTree -L 1
0.13
Error rate achieved by the landmarker weka.classifiers.bayes.NaiveBayes -E "weka.attributeSelection.CfsSubsetEval -P 1 -E 1" -S "weka.attributeSelection.BestFirst -D 1 -N 5" -W
0.78
Kappa coefficient achieved by the landmarker weka.classifiers.trees.RandomTree -depth 3
0.89
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.J48 -C .001
An estimate of the amount of irrelevant information in the attributes regarding the class. Equals (MeanAttributeEntropy - MeanMutualInformation) divided by MeanMutualInformation.
1
Number of binary attributes.
First quartile of mutual information between the nominal attributes and the target attribute.
0.25
Error rate achieved by the landmarker weka.classifiers.trees.REPTree -L 1
0.72
Kappa coefficient achieved by the landmarker weka.classifiers.bayes.NaiveBayes -E "weka.attributeSelection.CfsSubsetEval -P 1 -E 1" -S "weka.attributeSelection.BestFirst -D 1 -N 5" -W
0.85
Area Under the ROC Curve achieved by the landmarker weka.classifiers.lazy.IBk -E "weka.attributeSelection.CfsSubsetEval -P 1 -E 1" -S "weka.attributeSelection.BestFirst -D 1 -N 5" -W
0
Standard deviation of the number of distinct values among attributes of the nominal type.
0.1
Error rate achieved by the landmarker weka.classifiers.trees.J48 -C .001
2
Average number of distinct values among the attributes of the nominal type.
0
First quartile of skewness among attributes of the numeric type.
0.39
Kappa coefficient achieved by the landmarker weka.classifiers.trees.REPTree -L 1
0.13
Error rate achieved by the landmarker weka.classifiers.lazy.IBk -E "weka.attributeSelection.CfsSubsetEval -P 1 -E 1" -S "weka.attributeSelection.BestFirst -D 1 -N 5" -W
0.82
Area Under the ROC Curve achieved by the landmarker weka.classifiers.lazy.IBk
0.78
Kappa coefficient achieved by the landmarker weka.classifiers.trees.J48 -C .001
0.04
Mean skewness among attributes of the numeric type.
0.91
First quartile of standard deviation of attributes of the numeric type.
0.76
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.REPTree -L 2
0.72
Kappa coefficient achieved by the landmarker weka.classifiers.lazy.IBk -E "weka.attributeSelection.CfsSubsetEval -P 1 -E 1" -S "weka.attributeSelection.BestFirst -D 1 -N 5" -W
0.15
Error rate achieved by the landmarker weka.classifiers.lazy.IBk
65
Percentage of instances belonging to the most frequent class.
9.59
Mean standard deviation of attributes of the numeric type.
Second quartile (Median) of entropy among attributes.
0.25
Error rate achieved by the landmarker weka.classifiers.trees.REPTree -L 2
0.93
Entropy of the target attribute values.
0.66
Kappa coefficient achieved by the landmarker weka.classifiers.lazy.IBk
26
Number of instances belonging to the most frequent class.
Minimal entropy among attributes.
-1.82
Second quartile (Median) of kurtosis among attributes of the numeric type.
0.39
Kappa coefficient achieved by the landmarker weka.classifiers.trees.REPTree -L 2
0.76
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.REPTree -L 3
0.85
Area Under the ROC Curve achieved by the landmarker weka.classifiers.trees.DecisionStump
Maximum entropy among attributes.
-1.82
Minimum kurtosis among attributes of the numeric type.
7
Second quartile (Median) of means among attributes of the numeric type.
0.25
Error rate achieved by the landmarker weka.classifiers.trees.REPTree -L 3
0.1
Error rate achieved by the landmarker weka.classifiers.trees.DecisionStump
1.24
Maximum kurtosis among attributes of the numeric type.
1
Minimum of means among attributes of the numeric type.
Second quartile (Median) of mutual information between the nominal attributes and the target attribute.

14 tasks

520 runs - estimation_procedure: 10-fold Crossvalidation - evaluation_measure: predictive_accuracy - target_feature: binaryClass
234 runs - estimation_procedure: 10 times 10-fold Crossvalidation - evaluation_measure: predictive_accuracy - target_feature: binaryClass
0 runs - estimation_procedure: Interleaved Test then Train - target_feature: binaryClass
0 runs - estimation_procedure: 50 times Clustering
0 runs - estimation_procedure: 50 times Clustering
0 runs - estimation_procedure: 50 times Clustering
0 runs - estimation_procedure: 50 times Clustering
0 runs - estimation_procedure: 50 times Clustering
0 runs - estimation_procedure: 50 times Clustering
0 runs - estimation_procedure: 50 times Clustering
0 runs - estimation_procedure: 50 times Clustering
0 runs - estimation_procedure: 50 times Clustering
0 runs - estimation_procedure: 50 times Clustering
Define a new task